HydroTap G5 BCS100 Classic Chrome
Confirm Purchase
Upon purchasing this product, our customer care team will contact you to discuss the following requirements:
- Is the Zip unit onsite?
- Sufficient Power Supply - 1 x 10 amp (within 1 metre of the installation location)
- Water available to unit
- Is stone bench cutting required?
- Will your Zip unit be installed over a font or sink?
- Sufficient space available in cabinetry - available in the product install guide
View our range of finishes for this product.
This product is not available for online sale.Please contact Zip for more information.
The beautifully designed Zip HydroTap font accessory is self-draining and gives you the freedom to install your Zip HydroTap away from the sink area. This flexibility means you'll be able to position your HydroTap in just about any location you can think of, all you need is a little bit of imagination and a suitable drainage connection.
click to zoom
Font Kit Chrome
Font Kit Assembly Chrome - fits Classic, Classic Plus, Touch-Free Wave, Elite Plus and Miniboil Classic (with extension)
*Font installation incurs an additional fee.
The beautifully designed Zip HydroTap font accessory is self-draining and gives you the freedom to install your Zip HydroTap away from the sink area. This flexibility means you'll be able to position your HydroTap in just about any location you can think of, all you need is a little bit of imagination and a suitable drainage connection.
click to zoom
Font Kit Raised Chrome
Font Kit Raised Assembly Chrome with 135mm extension - Fits Classic, Classic Plus, Touch-Free Wave, Miniboil Classic and Elite Plus
*Font installation incurs an additional fee.
Zip HydroTap Boiling, Chilled, Sparkling, Filtered water system features a single under bench command centre including full colour interactive touch screen display with pin code protection and customisable settings including 2 boiling water safety modes, 3 energy saving modes including ON/OFF timers and sensor activated 'sleep when it's dark', 'Quiet' mode with automated intelligent fan speed adjustment, antimicrobial protection impregnated into key water paths for enhanced hygiene, 100% water efficient air cooled technology, 0.2 micron water filtration, and a refillable CO2 cylinder. Easy to install integrated ventilation tray included.
- Manufacturing Code
- H51763Z00AU
- Capacity
- Commercial
- Boiling Cups per hour
- 240
- Combined Chilled and Sparkling Cups per hour
- 175
We’re here to help. Contact us for advice or more details.
1800 42 43 44 Email Us Find a RetailerProduct Details
Specifications
- Tap
- Zip HydroTap CLASSIC Tap (Chrome)
- Water Pressure
- Min 250kPa - Max 700kPa
- Water Connection
- 1/2" BSP (G1/2)
- Water Supply Requirements
- Cold
- Water Valves
- Integrated 500kPa Pressure limiting valve and Dual Check Valve
- Power Rating
- 2.15kW 220-240V 50Hz
- Booster Power Rating
- Zip HydroTap Booster 2.2kW 220-240V 50/60Hz
- Power Supply
- 2 x 10 Amp socket outlets
- Dimensions
- W395mm x D464mm x H333mm
- Product Approvals
- WaterMark, RCM, ARC
- Warranty
- 5 years (appliance warranty 36 months plus additional 24 months tank warranty)
Installation
Installation Requirements
1. Installation and connection of your Zip HydroTap must be carried out by a qualified person, observing national and local regulations.
2. You will require suitable mains electrical and drinking water connections, plus waste water drainage all within 1 metre of the product.
3. Zip Micro is air-cooled so discrete cabinetry cut-outs are required for ventilation.
4. Installation on most bench tops is straightforward however some stone bench tops may require a specialised cutting service.
5. If you live in a hard water area, we recommend installation of a Zip scale filtration kit.
6. Installation by Zip Professional Service can be arranged with a phone call or through www.zipwater.com/book-service-visit
- Installation Detail