How to set or change energy modes - Zip HydroTap G3

Step 2: Press the [Adjust ^] button to select the sleep mode required.

Option1: ( 2hrs/64 degrees) Boiling water temperature will gradually drop to 64˚C after 2 hours of inactivity but the chiller will remain ON. Unit will wake up once the boiling lever is activated and heat to the set temperature.

Option 2: (2hrs to Off) Boiling and chilled water temperature will gradually drop to room temperature after 2 hours of inactivity. The boiler and chiller will remain OFF*.

If no “Off “ times are set and sleep mode is off, the HydroTap will operate 24 hours/7 days.

*Note: If the unit has gone into any one of the sleep modes you can “wake” it up simply by dispensing water. You will need to allow enough time for the water to come back to your selected temperature after you “wake” it up.


To activate “On/Off” mode
If you wish to use the “On/Off” mode you must also set your current date and time. Click here for instructions on how to set the date and time.

Step 1: Press the [Menu ^] button until you see “Monday On”

Step 2: Press the [Adjust ^] button until the required time for the unit to turn on is reached.

Step 3: Press the [Menu ^] button once and “Monday Off” will be displayed.

Step 4: Press the [Adjust ^] button until the required time for the unit to turn off is reached.

Step 5: Repeat steps for all other days you wish to set personalised times for the unit to turn on and off.

Note: If the unit is in OFF mode you can “wake” it up simply by dispensing water. The unit will automatically return to the selected OFF mode after 30 minutes of inactivity. You will need to allow enough time for the water to come back to your selected temperature after you “wake” it up.